Frame Installation

It is important to consider modes of installation when ordering your frame. Direct burial is our most highly recommended method. This requires for 2’ of the posts to be buried with cement. However, depending on your local codes, the amount of post required to bury may be higher.
For the vinyl 4x4 posts, using wooden 4x4 treated posts are also a recommended form of installation.
The vinyl post is able to act as a sleeve over the wooden post. With this type of installation, please allow about 12”-16” between the top of the wooden post and the bottom rail of the frame. This will allow for more “give” and less tension within the frame.
We also offer stakes for our 4x4 vinyl posts and 3x3 aluminum posts.

o Our Power stakes are used for frames with shorter posts and for the vinyl real estate
posts. This stake goes 17” into the ground and 10” into the post.

o Our GroundBreaker stakes are used for frames that are more temporary or will need to
be moved. The stakes go 22” into the ground and 13” into the post.

o Our aluminum stakes can also be called post extensions. They go 2’ into the ground
buried with cement and 2’ into the post for stability.